Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. In contrast to aluminium and timber, they don't rust or rot.

It is essential to clean and oil UPVC doors and windows regularly. This will prevent unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window is damaged, it can cause a great deal of damage to your home, making it extremely dangerous and possibly fatal. It is important to take the time to ensure that you're doing all you can to ensure that your windows are in good shape.

Single-pane windows are fairly simple to replace and generally fit into frames that were previously in use very easily. If you have double-paned windows that are held together by internal beading, it will be difficult to remove and replace the old panes. In this situation it is essential to purchase plastic spacers to aid in fitting the new pane into the window frame.

Wearing eye protection and heavy gloves is essential if you plan to remove the glass by yourself. It is also a good idea to lay down a drop cloth prior to when you start working on the glass, so that any shards fall onto the fabric instead of onto the floor where they can be trampled on and cause further damage.

After the glass has been removed from the window doctor, it's best to seal the gap with clear packaging tape or duct tape to prevent drafts and water from entering the home until a professional is able to come out and fix the window. This will also act as a barrier that will prevent any intruders from getting access to your home. If the distance between the window and the door is large, you might prefer security screens that includes a window. This will provide the best of both.

2. Sagging

uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash windows. However, over time they are susceptible to a range of issues, including sliding. A sagging uPVC window can cause issues with light, draughts and even security. It's important to take action immediately if you notice your uPVC windows are sliding.

To fix a sagging window you can try repositioning the hinges. You'll first need to open the windows to get at the frame. Then, using an screwdriver, take off the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after you've repositioned your hinges. If you're satisfied with the fit, you can tighten the screws to ensure they stay in the right place.

If you cannot reposition the hinges, you may have to replace the seal. As time passes, rubber seals lose their elasticity and become dry and cause them to lose tightness. It is essential to replace your seal as quickly as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles could also become loose. This is typically caused by screws that have been removed over time, but it could also be caused by the handle mechanism wears out. It's fairly simple to repair a loose uPVC handle. First, you'll need to close the window and then perform an experiment fitting. The corners of the sash must align with the casing joint. If it isn't, you can use a screwdriver or a wrench to loosen the handle and reverse the mechanism back into its original position.

3. Water Leaks

It is essential to take action if you get up each morning to find a smoky wall and floors that are wet. The leaks of water through windows could cause structural damage to your home and also hinder your ability to control the temperature inside your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is a relatively easy fix that can be completed by any competent DIYer. Depending on the severity of the problem the old caulking may need to be removed before a fresh layer can be put on. When it is time to uPVC repair, you should avoid over-caulking. This can make your window harder to clean and decrease its energy efficiency.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan has been angled properly so that it drains away from the window. In more serious instances, you may need to replace the window.

Other indicators of water leakage include sills that are rotten and the appearance of black spots of mold on the walls near the window. The mold thrives in damp environments and is able to quickly spread throughout the house.

It is also important to note that if the leak is coming from between the glass of your double glazed windows, it's more likely to be an issue with the glass seal, rather than the frame or sagging. A uPVC specialist can easily fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your uPVC window is difficult to open or if it blows open with an ease. Any competent DIYer can replace these in a matter of minutes.

Almost every household in the UK will have top-hung or side-hung uPVC windows that have hinges and, like all mechanical parts, they can wear down over time. It is very easy to change a window hinge but it's much easier if someone else helps you hold the frame.

Make sure that the uPVC hinges are open and closed in the right direction. This can be done by looking for the arrow on each hinge, this shows which way the window should be opened.

The issue can be caused either by opening the window incorrectly or a faulty installation in the factory. It is usually possible to fix the issue by sending us a picture via our website and we will be happy to give you advice.

It is also important to ensure that the hinges are lubricated regularly. This can be done by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can make the window easier to open and close. It also decreases the possibility of a window sticking and prevent corrosion. It is recommended to do this once a year. WD40 and other solvent-based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different things. First, the hinges because of wear and tear, may become displaced, which will cause a gap to form between the sash and the frame. These can be easily fixed by giving them a good clean, but when they're beyond repair my Windows and doors, it might be necessary to get them re-aligned or replaced. Secondly the interlock, this is located on the hinge side of the window and can be misaligned. Again, it's possible to just give them a clean but in some instances it could be necessary to get them replaced.

The seals may wear out or become damaged over time, repair my windows and doors allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the window doctor near me with low-emissivity glass. which will help regulate indoor temperatures, and also reduce the possibility of draughts.

The last way to reduce draughts effectively is by using a Draught-exclusion device. These are typically fabric tubes filled with a filler which can be put on top of your window sill. They will help stop cold air from entering and keep your home warm and cosy!

The windows made of upvc can remain a great source of insulation and security for your home by performing regular maintenance and repairs. It is crucial to keep in mind that all windows will eventually become worn out, and it could be cheaper to replace them rather than repair them. So, if you are experiencing issues with your Upvc windows, it's best to seek professional assistance as soon as you can.