Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are easy to maintain and durable, as well as long-lasting. Unlike timber and aluminium, they do not get rusty or decay.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will save you from unnecessary Repair my windows and Doors costs and also improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows can cause severe damage to your home, and could even be fatal. It is essential to ensure that your windows are in good shape.

Single-pane windows are relatively simple to replace, and they generally fit into old frames very easily. If you have double-paned windows which are joined by internal beading, it will be harder to remove and replace the old panes. In this situation it is essential to buy plastic spacers to make sure that the new pane fits into the window frame.

If you plan to attempt to remove the window panes yourself it is crucial to wear the appropriate safety equipment, including thick gloves and eye protection. It is also recommended to lay down a drop cloth before you start working on the glass, so that any shards fall onto the cloth instead of onto the floor where they could be trodden under and UPVC Window Repairs cause further damage.

After the glass has been removed and the glass is removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to prevent water and drafts from entering the home until a professional comes out and fix the window. It also acts as a barrier, preventing any intruders from gaining entry into your home. If the gap is particularly large, you might want to consider using the security door with an integrated window, as it will provide the best of both worlds.

2. Sagging

uPVC windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber sash windows. However, over time, they may be afflicted by a variety of issues like sagging. A sagging window can cause problems with light, draughts, and even security. If you find that your uPVC window is beginning to lose its shape, it's crucial to act fast to prevent the problem from becoming worse.

Repositioning the hinges could aid in fixing a window that is sagging. To accomplish this, you'll need open the window to access the frame. After that, using an screwdriver, take off the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've adjusted the hinges, shut your window and check for fitting. If you're satisfied with the fit, tighten the screws to ensure they remain in place.

If you aren't able to move the hinges, you may require replacing the seal. Rubber seals may dry out and lose their elasticity with time, which causes them to loosen. It is important to replace your seal as soon as you can in order to keep your uPVC window waterproof and draughtproof.

uPVC handles could also loosen. This is often caused by screws that have been removed over time, but it can be caused by the handle mechanism wearing out. It's a good thing that it's simple to repair a loose uPVC window handle yourself. You'll first need to close the window and perform an initial fitting. The corners of the sash should be aligned with the casing joint. If it isn't then you can use a screwdriver to loosen the handle and return the mechanism to its original its original position.

3. Water Leaks

If you're waking up to wet floors and damp walls each time it rains, it's important to take action. Water leaks from windows can not only cause degradation of your home's structure but also hamper your efforts to control the temperature inside your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is an easy fix that can be accomplished by anyone who is a DIYer with the skills. Depending on the severity of the problem the old caulking might need to be removed before a fresh layer can be applied. It is essential to remember that when it comes to uPVC window repairs you should not be tempted to apply too much caulk and then make the area harder to clean and reduce your energy efficiency.

Verify that the drainage holes are free of debris inside them and that the sill pan is properly angled to drain away from the window. In more serious situations, you might have to consider replacing the window.

Moldy sills and rotten ones are another sign of water leakage. The is a fungus that thrives in damp conditions and is able to quickly spread throughout the house.

It is also important to note that if the leak originates from the glass of your double-glazed windows, it is more likely to be a problem with the glass seal, rather than the frame or sagging. It is also possible to be corrected by a uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window is difficult to open or it opens with an ease. They can be repaired by any DIYer who is skilled and are usually completed in just a few minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that are hinged and like any mechanical part they will wear out over time. It is essentially a very simple process, but it's easier to do if you have someone to assist in holding the frame in place.

It is also worth checking that the uPVC hinges are being opened and closed in the correct direction. You can do this by looking for the arrow on each hinge. This indicates which way the window should be opened.

Faulty window hinges could be caused by improperly opening the window in a particular way or due to improper installation in the factory. This issue can be fixed by sending us a picture on our website. We will be more than happy to give you advice.

It is also essential to lubricate the hinges on a regular basis. This can be done by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regularly lubrication makes the window easier to open and close. It also helps prevent corrosion and reduce the risk of sticking. The ideal time to perform this every year. WD40 and other solvent based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc window repairs can be caused by a variety of different factors. The hinges can also be unbalanced due to wear, creating a gap between the frame and sash. This can be easily repaired by giving them thorough clean, however when they're beyond repair, it may be necessary to have them re-aligned or replaced. Secondly the interlock, this is located on the hinge side of the window, can also become misaligned, again it is feasible to give them a thorough clean, however in some cases it might be necessary to have these replaced.

The seals may wear out or get damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the window with low-emissivity glass, this will help in regulating indoor temperatures and will lessen the risk of draughts.

One of the most effective ways to reduce the draughts in your home is to use a draught excluder, these are typically made of fabric that are filled with some sort of filler and can be positioned on the windowsill on top. These will help to block out cold air and keep your home warm and cozy!

Your windows made of upvc will remain a great source of insulation and security to your home by performing regular maintenance and repairs. However, it is important to recognise that windows last for a certain period of time and eventually, they will reach the point when it's more cost-effective to replace them rather than repair them. If you are having issues with your upvc windows, it is best to seek professional assistance immediately.