Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are easy to maintain and durable, as well as long-lasting. They don't decay or rust as aluminum and timber.

It is important to clean and oil UPVC windows and doors on a regular basis. This will prevent unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it could cause a large amount of damage to your home, making it very hazardous and possibly fatal. It is important to ensure that your windows are in good working order.

Single-pane windows are relatively easy to replace, and they typically fit into old frames very easily. However If windows with double panes are secured by internal beading, it will be more difficult to take out the existing panes and install new ones. In this case, you will need to locate some plastic spacers to help the new pane to fit correctly into the window frame.

If you're planning to attempt to remove the glass panes yourself it is important to wear the proper safety gear such as gloves that are thick and eye protection. It is also recommended to lay down a dropcloth before you start working on the glass so that any shards will fall onto the fabric rather than on the floor where they can be trodden under and cause further damage.

It's a great idea to cover the gap with tape after the glass is removed. This will prevent drafts and water from entering your property until a professional comes out to fix the window. This will also provide an obstruction to prevent criminals from getting into your home. If the gap is large, you might think about the security door with an integrated window as it offers the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable energy efficient, uPVC window repairs durable and long-lasting alternative to timber windows made of sash. Over time, they can be affected by a variety of issues, including sagging. A sagging uPVC windows can cause issues with light, draughts, and even security. It's crucial to act when you notice your uPVC windows are sagging.

Repositioning the hinges can aid in fixing a window which is sliding. First, you'll need to open the windows to reach the frame. Then, using a screwdriver, you can unscrew the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've adjusted the hinges, shut your window and verify the fit. If you are happy with the size of the window, you can tighten screws to secure them in the right position.

If you cannot reposition the hinges, you could have to replace the seal. Rubber seals can dry out and lose their elasticity over time, causing them to lose their tightness. If this happens, it's crucial to replace the seal as soon as possible to ensure your uPVC windows remain watertight and secure from draughts.

UPVC handles can also loosen. Often, this is caused by screws that have become loose over time. However, it can also happen because the handle mechanism has been worn out. It's fairly simple to repair a loose uPVC handle. First, you'll need to close the window and then perform an experiment fit. The corners of the sash should be aligned with the casing joint. If it does not, you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism to position.

3. Water Leaks

If you wake up to wet floors and damp walls each time it rains, it is important that you take action. The leaks of water through windows could cause structural damage to your home and also hinder your ability to control the temperature in your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a simple fix that can be accomplished by any DIYer who is competent. Depending on the severity of the issue the old caulking may need to be removed before a new layer can be applied. It is important to keep in mind that when it comes to uPVC window repairs, do avoid the temptation to "over-caulk in order to make the area harder to clean and reduce your energy efficiency.

It is crucial to make sure that any drainage holes are clear of debris and that the sill pan has been angled correctly so that it drains away from the window. In more severe cases, you may need to replace the window doctor.

Moldy sills and rotten ones are other signs of water leakage. This mold thrives in damp environments and can quickly spread throughout the house.

If the leakage is occurring between the double glazing-glazed window, it is more likely the problem is with the seal rather than the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and blow open with a breeze It could be hinges at the fault. They can be replaced by any competent DIYer and can usually be completed in a matter of minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that use hinges and like any mechanical part they are susceptible to wear and tear over time. It is an easy process but it can be simpler with someone else to assist in holding the frame in place.

It is also worth checking that the uPVC hinges are opening and closed in the correct direction. You can do this by checking for the arrows on each hinge, this shows which way the window should be opened.

The problem can be caused by opening the window improperly or by a poor installation in the factory. Sending us a picture via our website will often solve the issue. We are more than happy to give assistance.

It is also essential to lubricate the hinges on a regular basis. Applying a light engineering lubricant to the hinges is a good method of doing this. We suggest using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It also decreases the risk of a window getting stuck and stop corrosion. Ideally, you should perform this every year. WD40 and other solvent-based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different things. The hinges can also become disaligned as a result of wear, causing an opening where the sash and frame meet. They can be repaired by giving them a good cleaning, but in the event that they are beyond repair it could be necessary to have them aligned or replaced. Second, the interlock can also become unbalanced. It is located on the hinge's side, and may need to be cleaned. In certain instances it might be necessary to replace these.

These seals can wear down or become damaged over time, allowing air to escape. Replacement of these with high-quality weatherstripping is a good way to stop draughts. Another option is to replace the upvc window with low-emissivity glass, this will help in regulating indoor temperatures, and also lessen the possibility of draughts.

The last way to reduce drafts effectively is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler, which can be put on top of your window sill. They can keep your home warm by blocking out cold air.

The windows made of upvc can continue to provide excellent insulation and security to your home with a little regular maintenance and repairs. It is crucial to keep in mind that all windows eventually become worn out, and it could be cheaper to replace them instead of fixing them. If you are experiencing issues with your Upvc windows, it is always recommended to seek assistance from a professional as soon as possible.