Repairs to uPVC Windows

uPVC is a great option for modern homes. They are easy to maintain and are durable and long-lasting. In contrast to aluminium and timber, they are not susceptible to rust or rot.

It is important to clean and oil UPVC windows and doors regularly. This will prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it could cause a large amount of damage to your home, which can make it very hazardous and possibly fatal. It is crucial to take the time to make sure that you're doing everything you can to keep your windows in good shape.

For single pane windows, it can be relatively simple to replace windows, and the new one is usually able to fit into the frame that was previously installed easily. However If you have double pane windows that are secured by internal beading, it will be more difficult to get rid of the existing panes and install new ones. In this case you'll need to source some plastic spacers that will aid the new pane in being able to fit correctly into the frame of the window.

If you plan to attempt to remove the window panes yourself, it is essential to wear the appropriate safety equipment such as gloves that are thick and eye protection. It is also recommended to lay down a dropcloth before you begin working on the window replacement panes, so that any shards fall onto the fabric and not on the floor which could cause them to be trampled under.

It's a great idea cover the gap with tape after the glass has been removed. This will keep water and drafts from entering your home until a professional comes out to fix the window. This will also provide an obstruction to prevent criminals from getting into your home. If the gap is large, you may want to consider using a security door that has an integrated window as it offers the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows with sash. However, over time they may be afflicted by a variety of issues like sagging. A sagging uPVC window could cause issues with light, draughts and even security. It's important to take action immediately if you discover that your uPVC windows are falling down.

To fix a sagging window you can try repositioning the hinges. To do this, you'll need to open the window so that you can get to the frame. Then, remove both the hinges on the top and bottom with a screwdriver and adjust them counter-clockwise or clockwise. Once you've adjusted the hinges, close the window and check for fit. If you're satisfied with the fit, tighten the screws until they stay in the right place.

If you cannot reposition the hinges, you might need to replace the seal. Over time rubber seals can lose their elasticity and dry out and cause them to loosen. It is crucial to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

UPVC handles can also become loose. The majority of the time this is due to screws that have become loose over time. However, UPVC Window Repairs it could also happen because the handle mechanism has worn out. Fortunately, it's easy to repair a loose uPVC window handle yourself. The first step is to close your window and do a test to ensure that it fits. The corners of the sash must be aligned with the casing joint. If it doesn't then you can use a screwdriver or a wrench to loosen the handle and reverse the mechanism back into position.

3. Water Leaks

It is essential to act if you get up each morning to find mouldy walls and floors that are wet. Leaks of water from windows can cause structural damage to your home and also affect your ability to regulate the temperature in your home. The most common reason for leaks in uPVC windows is that the sealant around the frame has been damaged or missing.

This is an easy fix that can be accomplished by anyone who is a DIYer with the skills. Based on the severity of the issue the caulking that was used up might need to be removed before a new layer of caulk can be put on. It is important to keep in mind that when it is about uPVC window repairs, do not be tempted to apply too much caulk and then make the area harder to clean and can decrease the efficiency of your energy usage.

It is important to check that the drainage holes are free of debris and that the sill pan is angled correctly so that it drains away from the window replacement. In more serious cases you may need to think about replacing the window.

Other signs of long-term water leakage include rotted sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in humid conditions and can propagate quickly throughout the home.

It is also important to remember that if the leak is coming from between the glass of your double-glazed windows, it's more likely to be an issue with the glass seal, rather than the frame or sliding. Again this can easily be fixed by a uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or slack and open in a breeze, it may be hinges at the fault. They can be repaired by any DIYer who is skilled and can be completed in a matter of minutes.

Like any mechanical part hinges are prone to be damaged over time. The process of replacing a hinge on a window is essentially a simple process, but it's easier if you have someone to help you hold the frame in place.

Check that the uPVC hinges are open and closed in the proper direction. This can be done by checking for the arrows on each hinge, this indicates the direction in which the window should open.

The problem can be caused by opening the window incorrectly or a faulty installation at the factory. This issue can be fixed by sending us a photograph on our website. We will be more than happy to give you advice.

Regular lubrication of the hinges is essential. This can be done by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It also decreases the possibility of a window sticking and prevent corrosion. This must be done at a minimum once a year. WD40 and other solvent based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by a few different factors. The hinges can also be unbalanced due to wear, causing an opening where the sash meets frame. This can be easily fixed by giving them a thorough clean, however in the event that they are beyond repair it might be necessary to get them re-aligned or replaced. The interlock may also become misaligned. This happens on the hinge's side, UPVC Window Repairs and might require to be cleaned. In certain instances it is possible to replace the hinges.

These seals are susceptible to wear and tear or get damaged over time, allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity lenses. This will help control indoor temperatures and lessen draughts.

Another method of reducing the amount of draughts is to use a Draught-exclusion device. These are usually fabric tubes filled with a filler that can be hung over your window sill. These will keep your home warm by blocking cold air.

The windows made of upvc can continue to provide excellent insulation and security in your home by performing regular maintenance and repairs. It is crucial to recognize that all windows have a life span and they may reach an point at which it is more efficient to replace them than repair them. So, if you are experiencing problems with your upvc windows, it is recommended to seek help from a professional as soon as you can.