UPVC Door Handles Replacement Guide

Once you've got the proper measurements, replacing your upvc door handle is a simple DIY project. These measurements include the distance between the backplate of the handle's fixing centres (sometimes referred to as PZ) and the centre of the key hole.

The most commonly used uPVC handle is two inline levers. One is internal and the other exterior, connected by a spindle. They operate the multipoint lock that is found on uPVC and aluminium doors, and also on some wooden doors.

Brands & Finishes

A broken uPVC handle could be more than just a minor inconvenience. It can also leave your home vulnerable to burglars who may force the lock open and gain access to your home. This is why it's crucial to be aware of the moment your uPVC door handles are starting to break down and act as soon as possible.

Fortunately, replacing your uPVC handles on your front door is a relatively simple task that only requires a few tools and some careful measurements. In the majority of cases, you'll simply put in your new uPVC handle and you're ready to go. But, it's best to look for the best quality locks and handles that are up to the highest security standards.

There are many different kinds of uPVC handles on the market that you can pick from. There are many different types of handles, including lever/lever handles pad handles, offset handles, and snib handles. Lever/lever handles, which consist of two inline handles which can be moved are extremely popular with homeowners. Pad uPVC handles are smaller and come with an offset design. This allows you to secure the outside of your home following entry.

An offset uPVC handle consists of one fixed, and one pad that can be moved. This kind handle is typically used on sliding patio door handle locks doors. Snib handles are similar to offset window handles replacement but they can be utilized on uPVC french doors.

It's important to take into account the style of your current doors and windows when choosing the replacement uPVC handle. The handle must match your doors' existing ones in terms of colour and finish. Certain handles are available in a variety of finishes such as black and white as well as others that can be found in more elegant options such as chrome or gold.

When you're taking measurements it is crucial to be sure to get the screw-to-screw dimensions right. The PZ measurement is a distance between the middle of the spindle hole as well as the centre keyhole. The screw-to-screw measurement is the distance between the screw hole on the existing handle and the closest screw on the door frame, and it is crucial to accurately measure this in order to find a suitable replacement.

Measurement and Fitting

The uPVC handle is fitted with two levers, one on each side of the lock mechanism which make it easy to operate from both inside and out. Handles are a crucial part of the security mechanism on a door. They offer a comfortable grip, and they work without effort. With the correct uPVC handles, you'll be able to ensure your door is secure and stylish at the same.

Choosing the correct uPVC handle can be a challenge and confusing as there are numerous sizes, shapes and designs available. But, there are three key measurements to take into consideration when choosing a replacement for your uPVC doors. The backplate fixing center keyhole and lever dimensions, as well as the spindle's diameter are crucial measurements. Taking into consideration these factors will ensure that the new handle is perfectly matched to your uPVC doors and provides an ideal fit.

Measuring these points is relatively simple but you must be as accurate as possible. You may end having a handle that doesn't fit correctly and causes problems when opening your uPVC doors. The top screw located at the central point of the backplate is the primary measurement. This is also known as the PZ dimension. This is the distance between the handle lever or axis of the keyhole and the centre of the screw. This is usually 92mm however, it could be different.

Also, make sure that your uPVC handles are equipped with the required number of keyspindles to operate your multi-point locking system. Ideally, these should be in line with the number of keys that you use to lock and unlock your uPVC doors. Certain older doors might have only one spindle to operate the lock, while more modern doors will have two spindles to allow for independent operation from inside and out.

It is not advisable to have a sliding uPVC handle because it puts an excessive strain on the locking mechanism. This could result in broken components. To avoid this, look for a set of uPVC door handles that have built-in spring cassettes. They aren't just beautiful but they reduce the pressure that operates on the door locking mechanism and can increase its time to last.

Broken Spring Cassettes

A problem with the tubular latch can cause a stiff door handle. It is usually a straightforward fix that can be accomplished by repositioning the handle's internal fixing plates. First take the door off and ensure that there are no obvious obstructions on the latch plate like loose screws or indications of internal parts peeking through. If this isn't the case, it's likely to be one of the spring cassettes within your upvc door handle replacement handle that may need to be relocated.

A door handle repair kit is the simplest method to do this. This kit will include all the tools required to take the handles off, and then reposition the cassettes. Simply follow the instructions to complete the procedure and you'll soon have a sagging or sliding uPVC door handle that is once again fully operable.

A floppy uPVC handle could be caused by thermal contraction but it is more common to signify that the gearbox has broken. This isn't a problem that you can fix at home. You will require the assistance of locksmith.

If you do need to replace the gearbox on your uPVC door it's important that you use a genuine replacement which will ensure that everything is installed properly. If you use an aftermarket component that is less expensive can cause problems, such as an insecure lock or lower security for your home.

You could also replace the entire uPVC handle and lock mechanism. This will not only solve the issue of sagging but also ensure that the door handle is fully operational and secure. This is not an inexpensive or quick fix. It will require the removal of the old uPVC handles and replacing them with a brand new one. This is only applicable to double-glazed doors that have sprung handles, since the door will have to be redrilled. You can also purchase a set of handles with springs built in. This will save your time and money.

Can I put a uPVC Door Handle on an aluminium or timber door?

When it comes to choosing doors for your home there are many factors to consider. Aluminium doorways are modern and appealing and uPVC provides durability, energy efficiency, and security. When it comes to the style of door you want to fit the appropriate handle is vital. If you're looking to replace your existing handles or install new ones, it's crucial to select the right handles for your home. Our uPVC door handle replacement guide will help you make the right decision and install them with confidence.

Switching the handle of a uPVC door handle is relatively simple and requires only a few tools. First, you will need to remove the old handle. This can be accomplished by removing the screws that keep it in place with the screwdriver. After the screws have been removed, you can take the handle away from the door.

You will then need to measure the door handle. To accomplish this, you'll need to find the centre of the back plate fixing holes. This is often called the PZ measurement. It determines the size of the spindle on your handle. If you are aware of this information, you'll be able to buy an alternative door handle that is the right size.

There are a variety of different kinds of uPVC door handle available to satisfy your individual needs. Some of them are designed to include additional security features like anti-drill protection, cylinder guards, and mole grips. These uPVC handle designs can be fitted to uPVC aluminum, wooden and aluminium doors and are ideal for those who are looking to increase security for their home.

If you're looking for a traditional uPVC handle There are other options to suit your taste. These can be found in various finishes like gold, black, and chrome. They are typically a little more expensive than standard handles, but will add a beautiful look to your patio door handle locks.

It is crucial to determine the dimensions of your chosen uPVC handle before ordering. You'll need to consider the measurements above, the key hole and lever dimension, and backplate fixing centres to ensure that the new handle is a perfect fit for your door.