Ghost Immobiliser 2

Secures your vehicle from key cloning & stopping thieves driving it using your original keys. Our latest immobiliser is connected to your vehicle's CAN data network and a unique PIN has to be entered to begin the engine.

Contrary to trackers ghost immobiliser and tracker - Candid-onion-fhw1n5.Mystrikingly.com - does not transmit any radio frequency signals & can't be detected with diagnostic tools. Also, it doesn't have any LED indicators or buttons that can give the impression that it is in your car or van.

Anti-key Cloning

The ghost immobiliser is created to fight key cloning and hacking. This device connects to the CAN data network of your vehicle and creates an unique pin code sequence that is activated by pressing the buttons from the factory on your dashboard as well as the steering wheel. This stops the thief from being able start your vehicle. If the incorrect PIN is entered it will prevent your engine from running, making it impossible to leave with your pride and Joy.

Ghost immobilisers use an innovative technology that is very difficult for thieves to defeat. The ghost immobiliser, unlike physical deterrents such as wheel locks and steering locks that are able to be cut, is a discreet electronic device. It isn't detected by thieves because it emits no radio signals and operates silently.

This next-generation immobiliser can protect your vehicle from a range of threats, including key-hacking relay attacks, key hacking and cloned copies. It also has the ability to stop thieves from acquiring an additional key or replacing your ECU by ensuring that it does not allow them to start your car without entering the correct PIN code first.

The ghost immobiliser 2, unlike other immobilisers, it does not require an external remote or key fob to operate. It is able to be deactivated via the driver's mobile by using a simple app. This is perfect for when you need to give your car away for valet parking, or for maintenance without keys.

The Autowatch ghost installation-II is the latest version of our revolutionary ghost immobiliser. It was designed to be simple and easy to use and yet be as secure as is possible. This is accomplished by linking the Ghost-II into the vehicle's data network CAN, which means that there aren't any additional wires to hide or easily identified. It also comes with a built-in feature that allows users to deactivate their Ghost-II by connecting to the vehicle's Bluetooth and you'll be able to get in and drive, without any hassle.

OBD port hacking

OBD port hacking is the latest method employed by professional car thieves to steal cars. Thieves are able to access your vehicle's OBD port with nothing more than an laptop, an app and a few cables that can be purchased online for under PS50. Once they have access, they will be able to do whatever they want to do, from resetting your vehicle's fault codes to tuning your vehicle, or getting it stolen in under a minute.

It can protect your vehicle from being stolen by requiring a specific PIN number to be entered along with your key fob before you start the engine or drive away. It communicates with the vehicle's ECU (Engine Control Unit), using the CAN Data Circuit. It is not detected by any scanning technology, RF or code grabbing. It comes with a Service/Valet mode that allows your vehicle to start without the PIN code.

To make use of an OBD hacking device you must have an operating system that is capable of interpreting the OBD protocol. These is available for less than PS100 on ebay or Amazon. You will also need cables with OBD pins that connect to the CAN bus, these are available on eBay and Amazon for around PS50. The cable has to be spliced into the wiring harness of your car, such as the radio wiring harness.

Once the hacker has access to the OBD port on your vehicle, they can send diagnostics to the system at a high baud rate that will cause a crash of the car's CAN and prevent the systems from working. This can cause the engine to stall and doors to lock, or even the brakes to be engaged.

No additional remotes or key fobs are required.

The car immobiliser is a fantastic piece of anti-theft technology utilized by millions of modern cars all over the world. An aftermarket immobiliser protects your vehicle with engine ECU software that stops cars from starting when an untrue transponder signal is sent.

It is possible for a criminal in the event that they know the code to deactivate an immobiliser, to disable it. The batteries in the majority of key fobs can be removed by removing it, so a thief can employ a simple tool remove the immobiliser's internal circuit board and replace it with an empty. They'll then be able to start your car.

With the TASSA approved Ghost 2 immobiliser, there are no remotes or keys to be purchased. The immobiliser is directly connected to the vehicle's ECU (Engine Control Unit). This is done through a discrete, silent data loop in the CAN which cannot be detected by diagnostic tools such as those used by high-tech thieves. It does not have a traditional keyfob with LED indicators, which means it's not visible.

You may need to deactivate Autowatch's Ghost 2 protection at certain times like valet parking or during a service. Ghost CAN immobilisers come with a feature called "Service Mode that is activated with a simple push of a button on your phone. The car is still operable however the maximum speed is limited to 36 mph.

Contact us today to schedule an appointment to see our workshop. A member of our team will explain the process, and give you your Ghost 2 emergency card, installation certificate, and security assurance.

Simple Change of PIN Code

Ghost is the next-generation device that protects your vehicle without cutting wires or installing key fobs from an aftermarket. It connects directly with the vehicle's CAN data network. A personalised PIN can be set by pressing buttons on the steering wheel and dash. The device doesn't emit RF signals, which means it is not able to be tampered with. This makes it impossible to be detected using sophisticated RF scanning and code grabbing technologies that are used by modern thieves.

The PIN code is able to be changed to lock out previous drivers or even include an override code if you forget the sequence. During installation, the installer will demonstrate how to accomplish this. The system also comes with the option of a valet mode that can be used to temporarily disable the pin input sequence so that your mechanic or garage can repair the car without needing to know the code. This is a great choice for those who don't want their PIN sequence to be disclosed, but want to leave their car with valet parking or service.

Contrary to Thatcham products that require additional key-fobs in order to operate, Ghost is a discreet system that makes use of the buttons inside your vehicle to create an unique and interchangeable PIN code sequence. The sequence is entered via the smartphone app, meaning that no additional LEDs are thrown and your car is protected with no risk of being blocked by hackers or other technology.

Every vehicle is tested

A bmw m2 ghost installer immobiliser, in contrast to key fobs which require you to press buttons, is hidden under the dash or steering wheel. You won't even know it's there. The device is connected to your vehicle's CAN data network and the personalised PIN code is inserted using buttons that are already present on your car. The system will then stop your engine from starting unless the code is entered prior to. This means that thieves can't duplicate the keys on your car or access the OBD port to hack your vehicle.

Ghost is a great option for all vehicles, including electric cars motorhomes, vans, and bicycles. It's also incredibly versatile and can be programmed to shut down in a variety of situations. For example, it can be programmed to go into Valet mode when the car is taken to a valet parking or service company. This permits you to drive within a speed limit of 30 mph and the ghost tracker installation immobiliser will start to activate itself when the vehicle returns to your home.

Another great feature is that the device can be reset to your personal PIN code at any time. This is great in the event that you lose the code or if the device becomes unusable.

It's also important to note that the device is unnoticeable to anyone who isn't familiar with it. This is because it runs through the buttons that are already on your car's dashboard and steering wheel, and utilizes the information they send to recognise the button that was activated. This makes it a secure and secure security system that can't be tampered by RF scanning or jamming, or even a door lock pick set.