Repairs to uPVC Windows

uPVC is a great option for modern homes. They are easy to maintain and durable, as well as long-lasting. Unlike timber and aluminium, they do not get rusty or decay.

It is important to clean and oil UPVC windows and doors on a regular basis. This will help prevent costly repairs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window has been damaged, it can cause a great deal of damage to your home, which can make it very hazardous and possibly fatal. It is important to ensure that your windows are in good condition.

Single-pane windows are fairly simple to replace and will usually fit into the frames of the past easily. However If you have double pane windows that are secured by internal beading, it'll be more difficult to take out the old panes and put in new ones. In this case, it is necessary to purchase plastic spacers in order to help the new pane fit into the window frame.

If you're planning to try to remove the window panes yourself, it is essential to wear the proper safety gear, including thick gloves and protective eyewear. It is also a good idea to lay down a dropcloth before you start working on the glass to ensure that any shards fall onto the cloth rather than on the floor, where they could be trampled upon and cause further damage.

It's a good idea to cover the gap with tape after the glass has been removed. This will keep water and drafts from entering your home until a professional comes out to fix the window. This will also act as a barrier, preventing any intruders from getting access to your home. If the gap between the door and upvc window repairs the window is substantial, you may need to consider security screens that has a window. This will provide the best of both.

2. Sagging

uPVC is durable, energy-efficient and affordable alternative to timber sash window. However, over time, they may be afflicted by a variety of issues like sliding. A sagging uPVC window can cause issues with light, draughts, and even security. If you find that your uPVC window is beginning to shrink, it's crucial to act fast to prevent the problem from getting worse.

Repositioning the hinges can aid in fixing a window that is sliding. To do this, you'll have to open the window to get to the frame. You can then unscrew both the top and bottom hinges with a screwdriver and adjust them counter-clockwise or clockwise. Close your window to check the fit after you've moved your hinges. If you are happy with the fit of your window, tighten the screws to keep them in the right position.

If you can't reposition the hinges you may require replacing the seal. As time passes, rubber seals lose their elasticity and dry out, which causes their tightness to decrease. It is important to replace your seal as quickly as you can to keep your uPVC window watertight and draughtproof.

uPVC handles may also loosen up. This is often caused by screws that have loosened over time, but it could also be caused by the handle mechanism wears out. It's a good thing that it's simple to repair the handle of a window that is loose yourself. First, you'll need close the window and perform an initial test fit. The joint at the corners of the sash should align with the joint on the casing. If it doesn't, you can make use of a screwdriver to loosen the handle, and then turn the mechanism back into position.

3. Water Leaks

It is important to act if you get up each morning to find a smoky wall and floors that are wet. Leaks of water from windows can cause structural damage to your home, and affect your ability to regulate the temperature of your home. The most common reason for leaks in upvc window repairs windows is that the sealant surrounding the frame is damaged or missing.

This is a relatively easy fix that can be completed by any competent DIYer. Depending on the severity of the problem the caulking used previously may require removal before a new layer of caulk can be applied. It is crucial to keep in mind that when it is about uPVC window repairs, do not be tempted to 'over-caulk in order to make the area more difficult to clean and can decrease the efficiency of your energy usage.

Make sure that the drainage holes do not have debris in them, and also that the sill pan has been angled correctly to drain away from the window. In more severe cases, you may need to replace the window.

Mold spots and rotted sills are another sign of water leakage. This fungus thrives in conditions of dampness and can spread quickly throughout the home.

It is also important to keep in mind that if the leakage is coming from between the glass of your double glazed windows, it is more likely to be a problem with the glass seal rather than the frame or uPVC window repairs sliding. A uPVC specialist can fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and blow open with a breeze It could be hinges that are at fault. They can be repaired by any DIYer who is skilled and are usually done within a few minutes.

Almost every household in the UK will have either top hung or side hung uPVC windows that use hinges and, just like any mechanical component they can wear down over time. It's very simple to replace a hinge on a window however it is easier if someone helps hold the frame.

It is also important to verify that the upvc window repairs hinges are opening and closed in the correct direction. Check for the arrows on each hinge to determine which direction the window should be opened.

Faulty window hinges could be caused by improperly opening the window in a particular manner or because of inadequate installation at the factory. This issue can be fixed by sending us a photograph through our website and we will be happy to give you advice.

Regular lubrication of the hinges is essential. This can be accomplished by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window to operate and close more smoothly. It can also reduce the chance of windows sticking and prevent corrosion. Ideally, you should do this once a year. WD40 or other solvent-based lubricants should not be used since they can cause damage to your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by a few different things. First, the hinges because of wear and tear, could become misaligned. This causes a gap to form where the sash meets the frame. If they're beyond repair, it could be required to realign them. Secondly the interlock, this is on the hinge side of the window, may be misaligned. Again, it's possible to just give them a good clean, but in some instances it could be necessary to have these replaced.

These seals are susceptible to wear and tear or be damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping is a good way to keep draughts at bay. Another option is to replace the window with low-emissivity glass. this will help to regulate indoor temperatures and will reduce draughts.

Another method of reducing the amount of draughts is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler which can be put on top of your window sill. They will keep your home warm by blocking out cold air.

With a little maintenance and repairs windows made of upvc will continue to provide a great level of insulation and security for your home. However, it is important to recognise that all windows have a life span and eventually, they will reach an point at which it is more efficient to replace them than repair them. So, if you're experiencing problems with your upvc windows, it's recommended to seek assistance from a professional as soon as you can.